Copper Coated Gouging Carbon Rod

AIR ARC GOUGING CARBON ELECTRODES

Introduction:

Air arc gouging carbon electrodes is used for localised gouging operations, for example,removal of defects and where it is more convenient to switch from a welding electrode to a gouging electrode rather than use specialised equipment. 

Product Application: The product is use for incise,dig,driller,welding, its available for mild steel, cast steel, stainless steel, pure steel and other metals.

Product Advantages: This product is easy to operate,having widely application scales,good effects and economical.

Using Method:

• The electrodes must keep in dry environment;if it is affected with damp must be drying before use.
• When using for the direct current,the electrodes link to the anode, and task to the cathode.
• Keeping steady of working air pressure 0.5-0.6MPa.
• The arc between Gouging Carbon Electrodes and task is 3mm,the electrodes come out clamp about 100mm.
• The Gouging Carbon Electrodes and tast must have a angle and dig throw the tangent.
• Keep aeration during use,operate accorde with the work limit.